A&D HW-100KGL User Manual download pdf (Page 45)

HW-G Instruction Manual Page 43

HW-G OZIM v1a

15 The Function Table

The function table is provided to store and reference items that determine the

performance of the scale. Each item has a parameter.

The parameters are maintained even without power applied.

15.1 The Procedure for Setting Parameters

Step 1 Turn off the display.

Press the ON/OFF switch while the ZERO switch is

pressed and held. The function table is displayed.

Step 2 Set parameters for each item using the following

switches.

^ switch Selecting the parameter of an item.

Selecting the value of a digit at f16.

< switch Selecting a digit at f16.

F switch Proceeding to the end of the table

without storing the parameter.

ENTER switch Storing a parameter for the current

item and proceeding to the next item.

Returning to normal mode from the

end of the table.

Step 3 Press the ENTER switch to return to the normal mode,

when end is displayed.

Note Pressing the ENTER switch on step 2, the parameter is

stored in the scale.

Note Pressing the F switch at any time will cause end to be

displayed. The press ENTER to return to the normal mode.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 70 71

No comments

A&D HW-100KGL User Manual Page 45