A&D OP08 Instruction Manual download pdf (Page 33)

Step 8 The current settings for serial communication will be displayed. Confirm that the settings

correspond with those shown in the table below . If your settings are different, change the

settings as specified in the table and then perform steps 9 and 10.

If the settings are correct, proceed to Step 11.

Baud Rate 2400

Data Bits 7

Parity Even

Stop Bit 1

Step 9 Scroll down to the bottom of the screen and click the OK button.

1 2 ... 28 29 30 31 32 33 34 35 36

No comments

A&D OP08 Instruction Manual Page 33