A&D GH Series Instruction Manual Page 29
- Page / 71
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
6.1. Basic Operation (gram mode)
English
GB 29
1. Calibrate your balance before use. (Refer to Section 3 “Calibration”.)
2. Place a container on the weighing pan if necessary.
Press the [RE-ZERO] key to cancel net weight. The balance displays zero.
Container: A vessel placed on the pan, but not to be included in the weighing data.
3. Place material on the pan or in the container.
4. Wait for the stabilization indicator to be displayed and read the data
5. Remove the material and container from the pan.
6.2. Counting Mode (pcs)
Selecting the counting mode
1. Select the unit pcs using the [MODE] key. If the counting mode can not be selected, refer to
Section 5 “Weighing Units”. (pcs : pieces)
Storing a unit weight
2. Press the [RANGE] key to enter the sampling mode.
3. If you want to select the number of items to be used for the sample, press the [RANGE] key
(several times). It may be set to 10, 25, 50 or 100.
4. Place a container on the weighing pan, if necessary. Press [RE-ZERO] key to cancel this weight.
ex. 10 0 pcs is displayed in the case of 10 items.
5. Place items on the pan. This number of items is the same quantity as the number displayed
(10, 25, 50 or 100).
6. Wait for the stabilization indicator to come on. Press the [PRINT] key to calculate the unit weight
and store it.
Counting items
7. You are now able to count the items by placing them on the pan.
Counting mode using the ACAI function
ACAI™ (Automatic Counting Accuracy Improvement) is a function that improves the accuracy of the
unit weight.
6. Weighing mode
- G SERIES Analytical 1
- INSTRUCTION MANUAL 1
- Contents 2
- Declaration 4
- 1. Set-up 5
- 1.1. Unpacking your Balance 5
- 1.4. Power Supply 7
- 1.6. Installing your Balance 9
- 1.8. Dimensions 11
- 2.Introduction 12
- 2.1. Options 13
- 2.2. Specifications 14
- 3.1. Calibration Group 15
- 3. Calibration 15
- G1204 100 g, 50 g 19
- G2104 +15.9 mg ~ –15.0 mg 19
- 200g 200g 23
- Calibration 24
- RESPONSE 25
- 5. Weighing Units 27
- 6.2. Counting Mode (pcs) 29
- 6. Weighing mode 29
- Detecting items 30
- Calculating unit weight 30
- Counting mode 30
- (Factory setting) 31
- 7.2. Initialising the Balance 32
- 8. Function Table 33
- •: factory setting 35
- 9.1. “Data output mode” 38
- 9. Serial Interface 38
- 9.2. “Data format” 39
- 9.3. Examples of data format 41
- 10. ID Number and GLP Report 43
- 10.2. GLP output 44
- 11. Data Memory Function 49
- 12. Underhook 52
- Formula to obtain the density 53
- Changing the function table 53
- Tempera 54
- Measuring the density 55
- Measuring procedure 56
- 14. RS-232C Specifications 57
- 15. Connection to Equipment 58
- 16. Commands 60
- 16.1. Command list 60
- 16.7. Command Examples 65
- 17.1. Error Codes 68
- 17. Maintenance 68
- 17.2. Other Symbols 71
Related products and manuals for Measuring, testing & control A&D GH Series
(24 pages)
(4 pages)
(42 pages)AEG L70360TL Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Waschmaschinen AEG L70360TL.
Wir stellen 2 PDF-Handbücher AEG L70360TL zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comments to this Manuals