A&D Weighing Indicator AD-4407 Specifications Page 43
- Page / 66
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
AD-4407 Weighing Indicator Page 41
Toward the Zero band
Toward the Zero bandToward the Zero band
Toward the Zero band
Preliminary and Free fall output are holding the off state.
Over/Under comparison starts. If f23 30, judgment starts when Free fall turns on.
The judgment is not latched and the output is according to the state at the time.
The Weighing completion relay is turned on if f24 2. The on time is set by f25.
The READY mark is blinking regardless of f24 and f25.
Start is may be accepted at this state.
Returns to Zero band
Returns to Zero bandReturns to Zero band
Returns to Zero band
Over/Under and Weighing completion output is off.
The READY mark is turned on.
10.2.3. Setting the Parameters of Setpoint Comparison
Refer to "10.1.2. Setting Upper/Lower Limit Values".
Zero band value is set at f26 of the F-Function, and the value does not belong
to a specific code memory, but is used commonly.
Setting Order and Display for Setpoint Comparison and
Setting Order and Display for Setpoint Comparison and Setting Order and Display for Setpoint Comparison and
Setting Order and Display for Setpoint Comparison and Simple batch
Simple batchSimple batch
Simple batch
f22
MODE Display 1 2 3 4 5
7
Setpoint Setpoint Final Free fall Over Under
Comparison Class Fi FF Hi Lo
1 Comparator OK HI LO
Triangle 1
8
Setpoint Setpoint Final Free fall Preliminary Over Under
Comparison Class Fi FF Pr Hi Lo
2 Comparator OK HI LO
Triangle
1 2
9
Setpoint Setpoint Final Free fall Full Over Under
Comparison Class Fi FF Fu Hi Lo
3 Comparator OK HI LO
Triangle
1 2
10
Simple Setpoint Final Free fall Over Under
Batch 1 Class Fi FF Hi Lo
Comparator OK HI LO
Triangle 1
11
Simple Setpoint Final Free fall Preliminary Over Under
Batch 2 Class Fi FF Pr Hi Lo
Comparator OK HI LO
Triangle 1 2
12
Simple Setpoint Final Free fall Full Over Under
Batch 3 Class Fi FF Fu Hi Lo
Comparator OK HI LO
Triangle
1 2
10.2. Setpoint Comparison
- Weighing Indicator 1
- This manual and Marks 2
- Contents 3
- 1. Compliance 5
- Standard connection 7
- AD-4407 Weighing Indicator 12
- ESC key is 12
- 5. Calibration 13
- ON/OFF key 14
- CAL key 14
- 5.2.3. Zero Calibration 17
- 5.2.4. Span Calibration 17
- Turn display off 18
- 0kg 50kg 100kg Gross 19
- MODE key to display lnr 0 20
- ESC key to finish this 20
- ZERO key and TARE key are 25
- 0 - 9 keys 26
- ZERO key to select switch 26
- 0, 1 key to select 26
- ZERO key 27
- 0 , 1 keys 27
- [Type2] 28
- [Type3] 29
- 6.2. F-Functions 31
- 6.3. CF-Functions 32
- 7. Tare 33
- M+ key to accumulate 34
- 8. Accumulation 35
- 9.1.1. Using Code Memory 37
- 10.1. Weight Check Mode 39
- 10.2.2. Simple Batch 42
- 10.2. Setpoint Comparison 43
- 11. Hold Function 45
- 12. Counting Function 47
- 13. RS-232C Interface 48
- 48
- 13.2. Data Format 49
- 13.3. Command Format 51
- Relay specifications 59
- 0 - 9 key. By 60
- Cf06=0,1 Cf06=2 62
- Cf07=0 Cf07=1 62
- 18. Specifications 63
Related products and manuals for Measuring, testing & control A&D Weighing Indicator AD-4407
(24 pages)
AEG L70260TL Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Waschmaschinen AEG L70260TL.
Wir stellen 1 PDF-Handbücher AEG L70260TL zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comments to this Manuals