LifeSource Health Line (Toll-Free): 1-888-726-9966
E-9
E-8
The memory function on the UA-774 blood pressure monitor is
designed for two people. For each START button, the monitor can
store up to 30 readings in memory. To keep track of previous
measurements accurately, we recommend that you use the same
START button each time you take a blood pressure reading.
To recall previous measurements in memory, press
and hold the START 1 or START 2 button. Your
average blood pressure reading will appear with the
number of measurements taken flashing three times.
Release the button after the display switches to the
memory index number (see illustration on right).
The previous measurements are displayed from most recent to
oldest. When viewing previous measurements, you will see the "M"
symbol appear on the upper left corner of this display. You can stop
measurements by pressing either START button again.
NOTE: Memory will be lost if batteries become low or are removed.
The UA-774 provides an average blood pressure
reading based on the measurements stored in
memory. When the monitor is turned on, the average
blood pressure reading will appear with the number
of measurements stored in memory flashing three
times. The START 1 button will provide the average
reading for User 1 and the START 2 button will
provide the average reading for User 2.
TAKING YOUR BLOOD PRESSURE
NOTE: If you wish to stop inflation at any time, press either START
button again.
NOTE: The maximum cuff pressure is set at 280 mmHg. If it reaches
280 mmHg, the auto exhaust will be triggered and cuff pressure will
deflate to 0.
6. When the inflation is complete, the deflation starts automat-
ically and the ❤ blinks, indicating that the measurement is in
progress. Once the pulse is detected, the symbol flashes with
each pulse beat.
NOTE: If an appropriate pressure is not obtained, the device
automatically starts to inflate again.
7. When the measurement is complete, the systolic
and diastolic pressure readings and pulse rate are
displayed and stored. See Page E-9 for more
details about the memory function.
The cuff deflates and the monitor automatically
shuts off after 60 seconds, or you can turn it off
by pressing either START button.
8. Remove cuff and make note of your blood pressure and pulse
rate on the Blood Pressure Record chart (see Page E-15),
indicating the date and time of measurement.
Additional logbook charts can be downloaded and printed for
free at www.LifeSourceOnline.com. or www.autocontrol.com.
In Canada (Toll-Free): 1-800-463-5414
ABOUT AVERAGE READING
ABOUT MEMORY
NUMBER OF
MEASUREMENTS
STORED IN MEMORY
AVERAGE
(18 pages)
(52 pages)
(50 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals