A&D EK-09H Specifications download pdf (Page 28)

10-2. GLP report

 To print the GLP report to the AD-8121B, select the function setting “info 1” and

“pUse 1” for the balance, and use MODE 3 of the printer.

 To transmit the GLP report to a personal computer, select the function setting “info

2” and “pUse 0”.

 The serial number attached to the lateral side of the balance may have a form

“#Q1234567” (# = I, E and so on). In this case, the first letter “#” is ignored as a

GLP data and output data has a form “Q1234567”.

Calibration report

 This function is not available after sealing the calibration (CAL) switch.

1. Perform calibration according to “7-1. Calibration

using a weight”.

2. end appears when the calibration has

been completed.

3. glp is displayed and calibration report is

output.

4. end appears again. Remove the weight

and press the MODE key to return to the

weighing mode.

AD-8121 format “info 1” General format “info 2”

‘

: Space, ASCII 20h

CR: Carriage return, ASCII 0Dh

LF: Line feed, ASCII 0Dh

end

glp

To output

calibration report

Operation of Calibration

(See “7.CALIBRATION”)

end

Returns to the weighing mode

`~~~~~~~~~~A~&~D<CRLF>

MODEL~~~EK-1200i<CRLF>

S/N~~~~~Q1234567<CRLF>

ID~~~~~~~~ABCDEF<CRLF>

DATE<CRLF>

<CRLF>

TIME<CRLF>

<CRLF>

CALIBRATED(EXT.)<CRLF>

CAL.WEIGHT<CRLF>

~~~~~~+1000.0~~

g<CRLF>

SIGNATURE<CRLF>

<CRLF>

---------------~<CRLF>

<CRLF>

A & D

MODEL EK-1200i

S/N Q1234567

ID ABCDEF

DATE 2011/11/14

TIME 02:53:21

CALIBRATED(EXT.)

CAL.WEIGHT

+1000.0 g

SIGNATURE

- - - - - - - -

Manufacturer

Model

Serial numbe

ID number

Date

Time

Calibration

executed

Calibration weight

Column for

signature

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 42 43

Comments to this Manuals

No comments

A&D EK-09H Specifications Page 28

Comments to this Manuals

Related products and manuals for Measuring, testing & control A&D EK-09H