A&D HT-120 Specifications download pdf (Page 6)

Errors

eeeeee Overload. Remove object from the weighing pan.

------ Out of range or unstable error. There is a load beyond the zero

range at the power-on. When pressed the RE-ZERO key or

powered on, unstable weighing shows this display either.

lbeeee Low battery. Replace batteries with four new ones immediately.

Caleee Calibration error. Unstable weighing or incorrect calibration weight.

erree# Internal errors (# will be 1, 2, 3, 4, 5 or 6). Request service.

FUNCTIONS

Entering the Function Settings

Turn the scale turned off and press the ON:OFF key while

pressing the RE-ZERO key. Then, the display will show the

software version p-1.00 (“1.00” is an example and may be a

different number.) This is the starting point of the function settings.

Key Operation

UNITS key To select a function item.

RE-ZERO key To change the parameter of each item.

ON:OFF key To finish the operation and turns off the scale.

Starting at the software version display, each function item appears

cyclically by pressing the UNITS key.

 ° p-1.00  °poff 1  °Cond 1  °trc 1 

 °Unit  °ltUp 3  °pnt 0 

  Press the RE-ZERO key.

   



To select the weighing units.

 

   

“”, “”, “” and “” show the movement by the UNITS key.

While the display shows function item, press the RE-ZERO key to

change the setting.

To finish the settings, press the ON:OFF key to turn off the scale.

°Unit 2

°Unit 1°Unit 3

°Unit

°Unit °Unit

°Unit

1 2 3 4 5 6 7 8 9 10 11 12

No comments

A&D HT-120 Specifications Page 6