A&D HT-120 Specifications download pdf (Page 7)

Automatic Power Off Function

If the scale is left ON and the STABLE  is displayed, the automatic

power-off function turns power off after approximately 5 minutes.

poff 0 Automatic power off function is disabled.

poff 1 Automatic power off function is enabled. (factory default)

Setting the Response/Stability Condition

This function is to specify the response speed and to stabilize the

weight value reducing the influence of ambient environment like

vibration. But note that the setting is a trade-off between response

and stability.

Cond 0 Fast response / Sensitive to the vibration

Cond 1 Normal condition for both response and stability (factory

default)

Cond 2 Slow response / Insensitive to the vibration

Setting the Zero Tracking Function

This function is to automatically track small zero drift caused by

changes in the ambient environment.

trc 0 Zero tracking function is disabled.

trc 1 Zero tracking function is enabled. (factory default)

Selecting the Decimal Point

This function is to select the decimal separator.

pnt 0 “.” (period) (factory default)

pnt 1 “,” (comma)

Setting the LCD Backlight Operation

This function is to control how the LCD backlight turns off. When the

weight data becomes and stays stable for some seconds, the

backlight will automatically turn off. The weight change or the key

operation will turn the backlight on (except the settings “always on ”

and “always off”).

ltUp 0 Backlight is always off.

ltUp 1 Backlight turns off 5 seconds after STABLE turning on.

ltUp 2 Backlight turns off 10 seconds after STABLE turning on.

ltUp 3 Backlight turns off 30 seconds after STABLE turning on.

(factory default)

ltUp 4 Backlight turns off 60 seconds after STABLE turning on.

ltUp 5 Backlight is always on.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

A&D HT-120 Specifications Page 7