A&D OP-11 Installation Manual Page 121
- Page / 182
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
07/2011 2 Operating A&D DataManagement
2.6 Transferring data
© Siemens AG 2011 All Rights Reserved
SIMATIC A&D DataManagement Client - 07/2011
2-121
Network connection
The most frequent link between computers is probably the network connection. A
network is the interconnection of computers via special network cards, which
enable a correspondingly high data transfer speed between the computers. The
data transfer rate is normally at least 10 Mbaud, as a rule it is higher. This enables
even large quantities of data to be transferred in a reasonable time. As PC based
devices are being used ever more frequently in the industrial environment, coupling
via networks for data backup is becoming ever more predominant. However, a
simple coupling between PCs and existing networks is not possible because
networks have to have specific security mechanisms.
One does not have access to an existing network, even when the essential
hardware, such as network cards and patch cables, is present and functional. The
computer and the network card must be known to the network, and the system
administrator must have assigned appropriate rights to the PC and user.
Note
Contact your system administrator regarding network accesses.
When using ADDM, the network connection can fulfill two different tasks:
• In the client-server application, the network connects the backup computer
to the server. ADDM stores the backup data on the server, and fetches the
desired data from the server.
• With PC based systems, such as SINUMERIK operator panels, the
network connection also takes over the task of transferring the data to the
new component for restoration after replacement of a component.
Operator panel
incl. PC
SMATC
S7300
SMATC
S7300
Server for
data storage
Operator
panel
Controls
PROFIBUS
RS-232
Ethernet
Data flow
to server
Data flows
to components
Fig. 2-4: PC based Systems
- SIMATIC 1
- Content 3
- Content 07/2011 4
- 07/2011 Content 5
- 1 A&D DataManagement 7
- 1.1 Overview 8
- 1.1 Overview 9
- Supported software tools 10
- Miscellaneous 13
- 1.3.2 Backup concept 14
- ADDM single user version 15
- Hardware requirements 16
- Memory requirement 16
- Software requirements 17
- Update registry 17
- 1.4.4 Installing ADDM Agent 25
- 2.1 User log on 27
- Logging a new user on 28
- 2.1 User log on 29
- Creating a new project 30
- Imaging the plant structure 31
- Copying/insert a subproject 31
- Details of each component 32
- Editing a project 32
- Disable objects for editing 33
- Enable objekt 34
- 2.4.1 NCU component 36
- PROFIBUS option 38
- NCU adresses 39
- Tips for the NCU 39
- NCU versions 40
- Routing via agent option 41
- Multibackup option 41
- Only NC programs 42
- 2.4.3 S5 Component 45
- 2.4.4 S7 Component 47
- S7 source data 49
- S7-backup 49
- Properties of the S7 backup 50
- Query Subnet ID 53
- CP342-5 in V2 STEP7-project 56
- 2.4.7 Drive component 59
- Drive interfaces 60
- SimoComU/A 60
- DriveES 61
- 2.4.9 Serial component 66
- 2.4.10 Path component 68
- Assign user 69
- Backup 70
- 2.4.11 PCIN component 71
- Select data 72
- Creating a file list 72
- Setting COM parameters 73
- Necessary settings for HPU 74
- 2.4.12 Neutral component 76
- Load command 78
- Backup command 79
- Compare command 80
- Comparison executed by ADDM 81
- Comparing binary or ASCII 82
- Returnfile 82
- Routing neutral components 83
- 2.4.13 SINUMERIK components 84
- Addressing 85
- Contents of the backup 86
- Option, Routing via agent 86
- Save only in the reset state 86
- Max. no. of backups 86
- Connecting the computers 88
- Boot disk for use with ADDM 89
- Adapting Protocol.ini 90
- Adapting System.ini 91
- Load network driver locally 92
- Overview 93
- Comments 97
- Inserting variable text 99
- Language-dependent menus 100
- Adding a new language 101
- NETBEUI network protocol 102
- 2.5 HD component 103
- 2.5 HD component 104
- TCP/IP network protocol 106
- Data backup and loading 107
- Requirement 107
- Selecting a language 109
- Making bootmedium 110
- Start transfer 111
- 2.6 Transferring data 114
- 2.6 Transferring data 115
- MPI, OPI, PROFIBUS 119
- V24 COM1/2 ports 119
- LPT1 parallel port 120
- Interlink drivers 120
- Network connection 121
- USB connection 122
- PC card slot 122
- Infrared connection 123
- 2.7 Comparison functions 124
- 2.7 Comparison functions 125
- Results 126
- Results only for NC programs 126
- Data comparison 127
- Defining the exclusion list 128
- Go to 132
- Select comparison source 133
- 2.7.5 Comparing the S7 CPU 134
- Defining the inclusion list 135
- Comparison per job 136
- 2.7.6 Comparing CPs 137
- 2.7.7 Comparing OPs 138
- 2.8 SIMATIC S7 functions 140
- 2.8 SIMATIC S7 functions 141
- 2.9.7 NC-Files to the PCU 146
- 2.10 Standard functions 148
- HMI DOS settings 149
- OP settings 150
- HD settings 150
- PCIN settings 151
- Multibackup settings 151
- Backup and Archive 152
- Neutral Component 152
- 2.10 Standard functions 153
- NCU component 154
- 2.10.2 Moving menu bars 155
- 2.10.5 Printing 158
- 2.10.6 Online-Hilfe 158
- 2.10.7 The About window 159
- 2.10.8 Changing icon files 159
- Ethernet (TCP/IP) 160
- Software 161
- 2.11 User management 162
- 2.11.1 Creating a new group 163
- 2.11.2 Creating a new user 164
- 2.12 Archive functions 165
- 2.12.3 Archiving 167
- 2.12.4 Dearchiving 168
- 2.12.6 Comparing archives 169
- 2.12.8 Displaying versions 170
- 2.12.9 Backup and Archive 171
- 2.13 Job server 173
- 2.13.3 Create Job 174
- 2.13 Job server 175
- 2.13.4 Confirm Job 176
- 2.14 Notes and tips 177
- A Appendix 179
- A Appendix 07/2011 180
- 07/2011 A Appendix 181
Related products and manuals for Measuring, testing & control A&D OP-11
(36 pages)© 2020, manymanuals.com. All rights reserved. | 0.567 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals