A&D AD-4408A Instruction Manual download pdf (Page 10)

Step 5 Change the setting value using either one of the methods below.

Method Description

Selecting a parameter

Only the parameter number to be selected is

displayed and blinks.

Press the ∧ or ∨ key to select a parameter.

Inputting the value

All the digits are displayed and a digit to be changed

blinks.

Press the < or > key to select a digit and

press the ∧ or ∨ key to change the value.

After setting, press the ENTER key. The next function number is displayed.

When the parameter is not to be changed, press the ESC key to return to the

function number display.

Step 6 Press the ESC key. The function number disappears and the indicator returns to

the state of step 3.

Press the ESC key to store the setting values in the FRAM and go back to the

weighing mode.

NOTE: The blinking decimal point indicates that the current value is not the weight

value.

If a value exceeding the settable range is entered, err dt is displayed and

the input is canceled.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

No comments

A&D AD-4408A Instruction Manual Page 10