A&D AD-4408A Instruction Manual download pdf (Page 9)

3.2.2. Setting the Functions

The functions described here are general functions.

General functions are divided into groups per function and are indicated by the group

name followed with the function number, FXX.

NOTE: General functions determine the AD-4408A performance and all of the

settings are stored in the FRAM.

Setting Procedure

Step 1 While pressing and holding the ENTER key, press the F key.

fnc is displayed to indicate that the indicator will enter the general function

mode.

Step 2 Press the ENTER key. The indicator enters the general function mode.

To go back to the weighing mode without entering the general function mode,

press the ESC key.

Step 3 Press the ∧ or ∨ key to select the function group to be set.

Display Group name

rtuf

Modbus-related functions

Press the ENTER key. The function number will be displayed.

Function No. Function Description Default value

rtuf01 Station No. 1 to 247: Station No. 1

rtuf02 Baud rate

1: 1200 bps

2: 2400 bps

3: 4800 bps

4: 9600 bps

5: 19200 bps

6: 38400 bps

7: 57600 bps

8: 76800 bps

9: 115200 bps

rtuf03 Parity

0: None

1: Odd

2: Even

NOTE: Data bits are fixed to 8 bits and stop bit is fixed to 1 bit.

Step 4 Press the ∧ or ∨ key to select the function number to be set.

Press the ENTER key. The current setting value will be displayed.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

No comments

A&D AD-4408A Instruction Manual Page 9